![]() | ||
Your browser is not supported. | ||
Please browse our site using any of the following options:
| ||
STAY PAWSITIVE
![Stay Pawsitive Project Stay Pawsitive Project](/medias/stay-pawsitive-project.jpg?context=bWFzdGVyfHJvb3R8MTg3Nzg2fGltYWdlL2pwZWd8cm9vdC9oZDgvaGE0LzEzNTA4MjY0NTkxMzkwL3N0YXktcGF3c2l0aXZlLXByb2plY3QuanBnfGQwZTU4ZDI1YjNmMzQ4ZjU5ZTExODM1OTU2MWFiZDhmNDMzMDBkYzU0ZjQ3M2EzYmZiNzI3YmQyNzNkYmQyNzU)
What you'll need:
- Cricut maker or Explore machine
- Design space application
- Cricut iron on vinyl
- Crafters choice polyester bag with zip, or polyester fabric bag
- 12' x 12' standard grip machine mat
- Cricut easy press 2
- Cricut easy press mat
- Lint roller
- Butcher's paper & White cardstock paper
- Weeding tools
- Scissors
Instructions
Preparing your Design
Step 1 - Login to the cricut design space application and search the cricut access projects for 'Stay Pawsitive Pencil Bag' or follow this link: https://design.cricut.com/landing/project-detail/611d6055204bea0001e6fabe
Step 2 - To alter the project, select 'customize', then use the tools in the edit panel to make changes before you cut. Otherwise click 'make It'.
Tip- Be sure to mirror your mats before cutting if using design space.
Cutting your Design
Step 1 - Select everyday iron-on from the list of materials. Place the iron on sheet, liner side down onto the cricut standard grip cutting mat.
Step 2 - Load your mat into the machine and cut your design. Once the cut is complete, unload your mat from the machine and weed your image.
Tip - To secure your vinyl onto the mat, tape down using washi tape.
Prepare your Material
Step 1 - Using the lint roller, prepare your pencil case surface by removing any dust or lint.
Step 2 - Pre-heat the cricut easy press 2 for 30 seconds at a temperature of 155 degrees Celsius.
Step 3 - Follow the listed stacking order for applying your design onto the pencil case:
- Cricut easy press 2
- Butcher's paper
- Iron on design face down, liner side up
- Pencil case face side up
- Inside pencil case - 80 (lb) white cardstock paper 80 or 4 layers of butcher's paper
- Cricut easy press mat
Apply your Design
Step 1 - Place your pencil case on the cricut easy press mat face side up and cover with butcher's paper
Step 2 - Pre-heat the pencil case for 30 seconds at a temperature of 155 degrees Celsius. Remove the butchers paper form the top of the pencil case.
Step 3 - Place design face down onto the pencil case, liner side up and cover with butcher's paper. Press with light pressure 155 degrees Celsius for 30 seconds.
Step 4 - Slowly lift press, remove butcher's paper and allow the design to cool completely before removing the liner.
Care Instruction
Cold hand wash inside out.