BALLOON TUNNEL SPIRAL

Instructions

1. Set up the ballon tunnel as per instructions in the box, ideally you will want this to be inside with lots of space. We've made our arch smaller to suit by excluding 2 tent poles in the base on one side.
2. Stretch out the two bases so the arch is nice and secure - you may want to put something behind it whilst you are working on it. Once all balloons are evenly secured it will be stronger and can be secured with the rope supplied
3. Measure a 23cm space between your two vertical flat surfaces - you will use this as a guide to make your balloons uniform in size
4. Blow up a balloon, to make sure it's the right size place in the 23cm gap and allow air to escape until it fits into the gap. Hold the balloon in your hand. Repeat with another balloon.
5. Twist the nozzle of both balloons around each other and tie off to make a duo (2 balloons)
6. Repeat step 4 and 5
7. Twist both duos together to make a quad (4 balloons)
8. Twist the quad around the tunnel
9. Repeat steps 4 to 8 until you've finished the entire tunnel. We used approx 26 quads
10. Once tunnel is finished the bases can be put closer together to achieve desired height/width. Secure in place with provided rope

Note: Refer to Spiral Colour Pattern in downloadable project sheet. Each letter represents a colour.