MUSLIN WRAP, BURP CLOTHS & BANDANA BIBS

INSTRUCTIONS

Baby Wrap

Step 1

Straighten the cut edges of Printed Double Cloth so that the fabric width and length measures approximately 138cm x 138cm

Step 2

Fold raw edges over twice and sew. Add 2 lengths of Ric Rac braid across one corner as picture.

Burp Cloth

Step 1

Cut 2 pieces of Double Cloth 42 x 28cm. Round the corners and cut a small piece of Ric Rac Braid. Double-up the braid and pin to one corner facing to the inside. With right sides together sew the pieces together with a 1cm seam allowance leaving enough gap to pull the cloth through to the right side after clipping corners. Hand-stitch gap closed.

Step 2

Press flat then sew Ric Rac braid aroung the edges.

Bandana Bibs

Step 1

Cut 2 pieces of Double Cloth following the finished measurements to create a triangle shape (35cm x 18cm). Round the corners same as the Burp Cloth. With right sides together sew the pieces together with a 1cm seam allowance leaving enough gap to pull the cloth through to the right side after clipping corners. Hand-stitch gap closed.

Step 2

Press flat then sew Ric Rac braid around the top edge on the inside edge, then turn over. Stick on Velcro dots and secure with stitching.