Your browser is not supported. | ||
Please browse our site using any of the following options:
| ||
ARBEE FELT HALLOWEEN WITCHES HAT
Level: Easy
What you'll need:
- Arbee 3mm Black Felt 50cm
- Arbee Glitter Felt Teal 20cm
- Arbee Glitter Felt Gold 20cm
- E6000 Fabri-Fuse Glue
- Sewing Machine
- Scissors
- Thread
- Pins or Clips
Instructions:
Step 1- Download and print out Arbee Felt Witches Hat template.
Step 2- Pin on paper template onto fabric. Brim and Cone of hat onto Black 3mm Felt, sash on Teal Glitter Felt and buckle on Gold Glitter Felt.
Step 3- Cut out the pieces according to the template.
Step 4- Sew the cone straight edges together and turn out.
Step 5- Sew the brim onto the cone.
Tip: The brim has a large seam allowance, snip into the seam allowance approximately every 2-3cms this will help to sew to the curve of the cone. A loose hand stich first may also help before machine stitching but remember to remove the hand stitch afterwards.
Step 6- Sew the straight edges of the sash together.
Step 7- Place the sash onto the cone, either sew or use E6000 Fabri-Fuse to hold in place.
Step 8- Either hand stitch or use E6000 Fabri-Fuse to add buckle to front of hat.