![]() | ||
Your browser is not supported. | ||
Please browse our site using any of the following options:
| ||
TRADITIONAL FILLABLE BAUBLES

Level: Easy
Golden Pinecone Baubles:
What you'll need:
Instructions:
Step 1- Cut the stems off the fake pinecones and gold berries. Place inside the opened bauble.
Step 2- Apply a thin layer of Helmar 450 glue to the rim of the bauble. Put the halves back together, allow to dry.
Golden Ball Baubles:
What you'll need:
Instructions:
Step 1- Remove silver cap from the top of the bauble. Place desired amount of golden balls inside the bauble.
Step 2- Carefully replace cap.
Gold and Silver Leaf Baubles:
What you'll need:
- Jolly & Joy DIY 8cm Fillable Bauble 4 Pack Clear 8 cm
- Mod Podge
- Gold Leaf
- Silver Leaf
- Tweezers
Instructions:
Step 1- Remove silver cap from the top of the bauble. Insert a small amount of Mod Podge into the bauble, swirl it around to make sure the bauble is completely covered.
Step 2- Use tweezers to insert gold leaf and silver leaf to the inside of the bauble.
Step 3- Carefully replace cap.
Tinsel and Vinyl Baubles:
What you'll need:
- Jolly & Joy Fillable Christmas Mason Jar 4 Pack Clear
- Cheering Pom Poms Red
- Cricut Machine
- Cricut permanent Vinyl
- Cricut weeding tool
- Cricut transfer tape
- Tweezers
Instructions:
Step 1- Remove base of the bauble. Cut strips from tinsel cheerleading pompoms and fill the bauble.
Note: You can use tweezers or long nose pliers to help get the tinsel in the bauble.
Step 2- Use Cricut design space to create your design.
Step 3- Use a Cricut machine to cut the design from permanent vinyl.
Step 4- Weed out the vinyl that you don't need (inside of the letters and around the letters). Apply transfer tape.
Step 5- Apply the vinyl to the bauble. Remove the transfer tape.
Step 6- Replace base of the bauble.
Gingerbread Man Glitter Bauble:
What you'll need:
- Jolly & Joy DIY Fillable Plastic Baubles Clear
- Glitter
- Gingerbread Man ornaments
- Helmar 450 glue
- Hot glue gun and glue sticks
Instructions:
Step 1- Open the bauble and put one half face up.
Step 2- Fill with desired amount of glitter.
Step 3- Use hot glue to secure the Gingerbread Man ornaments ribbon to the bauble inner top edge of the bauble.
Step 4- Apply a thin layer of Helmar 450 glue to the rim of the bauble. Join the halves back together.
Wooden Star Bauble:
What you'll need:
- Jolly & Joy Fillable Dome Bauble 4 Pack Clear
- Wooden star ornaments
- Hot glue gun and glue sticks
- Mod Podge
- Fake snow
Instructions:
Step 1- Open base of the bauble. Tie a knot in the string of the wooden star ornament, to shorten.
Step 2- Apply a small amount of hot glue to the end of the string and adhere to the inside centre top of the bauble.
Step 3- Apply a small amount of mod podge to the base of the bauble, and fill with fake snow.
Step 4- Screw the base back onto the bauble.
Wooden House Bauble:
What you'll need:
- Jolly & Joy Fillable Dome Bauble 4 Pack Clear
- Wooden house ornaments
- Small tree decorations
- Hot glue gun and glue sticks
- Mod Podge
- Fake snow
Instructions:
Step 1- Open base of the bauble. Use hot glue to attach the house and trees to the base.
Step 2- Apply a small amount of hot glue to the end of the string and adhere to the inside centre top of the bauble.
Step 3- Apply a small amount of mod podge along the roof of the house to attach some fake snow.
Step 4- Fill the lid of the bauble with desired amount of fake snow. Screw the base back onto the bauble and flip back right way up.