![]() | ||
Your browser is not supported. | ||
Please browse our site using any of the following options:
| ||
FLANNEL & MINKY BABY SHOWER SET
![Flannel & Minky Baby Shower Set Project Flannel & Minky Baby Shower Set Project](/medias/flannel-minky-baby-shower-set-project.jpg?context=bWFzdGVyfHJvb3R8MTc0MTYzfGltYWdlL2pwZWd8cm9vdC9oMjkvaDUyLzEzNjU3MDk2OTc4NDYyL2ZsYW5uZWwtbWlua3ktYmFieS1zaG93ZXItc2V0LXByb2plY3QuanBnfGVlNmExMjM2MjVmMzFlZjY3MTMwNWFmODZhMDc0OTZkNDdiZDU3YTRhNGM0YTZhOTYzOTU4YmQxNjU2MjI2NGM)
LEVEL: BEGINNER/INTERMEDIATE
What you'll need:
Swaddle Blanket
- 1m printed flannelette
- 1m minky dot
Swaddle Cloth
- 1m printed flannelette
Burp Cloth
- 40cm printed flannelette
- 40cm minky dot
INSTRUCTIONS
Swaddle Blanket
Step 1 - Cut a piece of flannelette 1m x 1m, fold in half, then in half again so that the four corners are together. To make curved corners, place a round object (like a small plate or bowl) on the fabric at the corner and draw a curved line from one side of the corner to the other. Cut along the line to remove the pointed corners.
Step 2- Using the trimmed piece of flannelette as a stencil, cut a piece of minky dot fabric the same size and shape.
Step 3 - Place the flannel square and the minky square right sides together and pin around the edges. Stitch around all edges, leaving a 20cm opening for turning.
Step 4 - Clip around the curves and turn blanket right side out. Pin opening closed.
Step 5 - Topstitch around the blanket close to the edge to secure.
Swaddle Cloth
Step 1 - Cut a 1m square piece of flannel.
Step 2 - Fold over an 8mm hem on each side and press with a hot iron, carefully tucking in the corners.
Step 3 - Repeat this process, folding over a further 8mm and pressing.
Step 4 - Stitch around the swaddle cloth 6mm from the edge, backstitching to secure the end stitches.
Burp Cloth
Step 1 - Cut a piece of flannelette and a piece of minky dot 30cm x 38cm.
Step 2 - Place the fabrics right sides together and pin around the edges.
Step 3 - Stitch around all edges, leaving a 15cm opening for turning.
Step 4 - Turn burp cloth right side out. Pin opening closed.
Step 5 - Topstitch around the burp cloth close to the edge to secure.