![]() | ||
Your browser is not supported. | ||
Please browse our site using any of the following options:
| ||
STAR WARS BABY BLOCKS
![Star Wars Baby Blocks Project Star Wars Baby Blocks Project](/medias/star-wars-baby-blocks-project.jpg?context=bWFzdGVyfHJvb3R8NjYwNDcwfGltYWdlL2pwZWd8cm9vdC9oM2UvaDdjLzEzODg0OTA5MzU1MDM4L3N0YXItd2Fycy1iYWJ5LWJsb2Nrcy1wcm9qZWN0LmpwZ3xlZmMwMzUzNjEyMTViMWU1YmNkNzU0OGNjNmQxMGZmOTQxNTk3NDY3OWZiODBjZGIyNjVmMDUxM2UzYzg2YjFh)
LEVEL: EASY
What you'll need:
- 20cm Star Wars grey chibbi minky fleece
- 20cm Star Wars chibbi block
- 20cm Organic cotton navy quilters
- 20cm Organic cotton off white quilters
- Sewing Machine
- Matching thread
- Scissors
- Ruler
- Pencil
INSTRUCTIONS
Step 1 - Cut your fabrics for each block you will need 6 - 3.5" squares
- Star Wars grey chibbi minky fleece x 2
- Star Wars chibbi blocks x 2 - this print can be fussy cut to have 4 icons within the square, make sure to line your ruler up and cut ΒΌ seam allowance around the 4 icons you have chosen - see finished image for guidance)
- Organic cotton navy quilters x 1
- Organic cotton off white quilters x 1
NOTE - Use a 1/4″ seam allowance when sewing the squares together. Leave 1/4″ at the start and end of each side, you will use that 1/4″ to attach one square to another.
Step 2 - Sew the 4 Star Wars print squares together into a row of 4 alternating each print. Sew one navy square to the top of the second square in the row, and the off-white square to the bottom.
Step 3 - Bring the sides up one at a time and stitch them together until you have a cube. Leave a 1.5″ opening between two of the squares for turning and stuffing.
Step 4 - Clip the corners to reduce bulk, then turn the block right side ouy.
Step 5 - Stuff with hobby fill and use a ladder stitch to close the opening.