![]() | ||
Your browser is not supported. | ||
Please browse our site using any of the following options:
| ||
IMPRESSART PRESENT GIFT TAG
![Impressart Present Gift Tag Project Impressart Present Gift Tag Project](/medias/impressart-present-gift-tag-project.jpg?context=bWFzdGVyfHJvb3R8NTI3NDI1fGltYWdlL2pwZWd8cm9vdC9oOTgvaGFiLzEwMTczMzI3OTY2MjM4L2ltcHJlc3NhcnQtcHJlc2VudC1naWZ0LXRhZy1wcm9qZWN0LmpwZ3wxYzJlOTVmMDdhZTY3YjY3OGM2ZTlhZTUyZDRkNTQ2NmVhOGEyN2VlN2NhNWY0YmQ4YzMzNGY0ZTIwZDY0ODZk)
LEVEL: EASY
WHAT YOU'LL NEED:
- Ergo-Angle Hammer Metal
Stamping Hammer - Steel Block
- 1 1/4 inch Aluminum Circle Blank
- Juniper Uppercase Letter Sets
- Stamp Guides
- Stamp Enamel Marker
- Soft Cloth
- 7mm Jump Rings
- Ribbon
- Chain Nose Pliers (2)
INSTRUCTIONS
Step 1 - Punch a hole at the top center of your circle blank, then place on the Steel Block.
Step 2 - Place the large Circle Guide at the top center of your blank.
Step 3 - Select your stamp. When holding the stamp, make sure the ImpressArt logo is facing you to ensure the letter will be stamped in the correct direction. Hold your stamp on the bottom of the blank and lightly drag it up toward the edge of the guide, strike with medium force. Repeat with each letter, using the marks on your Circle Guide to space letters evenly. Once you complete
your "from" line, remove the circle sticker guide.
Step 4 - Place a Straight Guide 1/4 inch down from the top of your blank, making sure that
the long orange line is aligned with the hole. Use that center line to stamp the star below the hole.
Step 5 - Move your stamp guide down 1/4 inch and stamp out the word "to", using the lines to space your letters evenly. Continue this process for the recipient's name, and the year. (Tip - use your judgment for spacing letters if you want to create a "tree" formation.)
Step 6 - Use your chain nose pliers to laterally twist open the jump ring, slide the blank on and then laterally twist with tension to close.
Step 7 - Slide your ribbon through the jump ring and attach to your gift.