![]() | ||
Your browser is not supported. | ||
Please browse our site using any of the following options:
| ||
NO SEW BOW
![No Sew Bow Project No Sew Bow Project](/medias/no-sew-bow-project.jpg?context=bWFzdGVyfHJvb3R8NDM5NTc2fGltYWdlL2pwZWd8cm9vdC9oY2YvaDRkLzEwMTcwNTQ5NDY5MjE0L25vLXNldy1ib3ctcHJvamVjdC5qcGd8YjI0MDIwNzFkZjZmNmI2NjRjNDFhYjVmZTRhNDFkY2I4OTQ1ZjNlNjNmNWYwZWQ0YzkyOWEzOWJmYzgxYzI2Ng)
LEVEL: EASY
WHAT YOU'LL NEED:
- 36cm x 20cm strip of printed cotton fabric (bow)
- 10cm x 8cm strip of printed cotton fabric (center of bow)
- Elastic hair tie or hair pin
- Craft glue or hot glue gun
- Iron
INSTRUCTIONS
Step 1.With right side of the bow fabric facing down flat, fold in 6cm along each long side into the center of the fabric with sides overlapping. Press flat.
Step 2. Fold in the short sides to the center of fabric overlapping ends by 2cm. Press flat.
Step 3. Gather the center of the fabric into neat folds or gathers. Glue gathers together to secure.
Step 4. With right side of the center strip fabric facing down flat, fold in 2cm along one short side then fold in 3cm from the other short side with sides overlapping. Press flat.
Step 5. With the right side of the strip facing down, place the front of the bow right side down on top of strip. Glue hair tie to the middle back of the center of the bow, then end glue one raw edge of middle strip over the top.
Step 6. Wrap the other end of strip around the other side of bow firmly, folding under excess end and glue down on top of other end and hair tie to the center of the back of the bow.