TULIP TIE DYE DENIM JACKET

INSTRUCTIONS

Step 1 - Lay down plastic to protect your work surface. Then follow the directions on the Tulip Dye Packet to prepare your dye bottles.

Step 2 - Fill a couple of cups or jars with water to dilute your dye/clean your brushes.

Step 3 - Place a piece of card or plastic inside the jacket so the dye doesn't run through to the other side of the garment.

Step 4 - Begin by squirting a small amount of dye onto the jacket and use a paint brush and water to spread the dye around in a blotchy random pattern. Use more water if you wish to dilute the colour more and add more dye if you want a more vibrant colour.

Step 5 - Repeat this process with each colour working your way around the jacket until it is completely covered. Allow for jacket to dry slightly before turning and doing the other side.

Step 6 - Leave jacket to set for 6 - 8 hours.

Step 7 - Once jacket has set, rinse under water to wash away any excess dye colours. Allow jacket to dry fully before use.