 | ||
| Your browser is not supported. | ||
|
Please browse our site using any of the following options:
| ||
SISER DRINK BOTTLES
Level: Beginner
What you'll need:
- Blank drink bottles
- Siser EasyPSV:
- Siser EasyPSV Application Transfer Tape
- Weeding tools (Tweezer and Weeder tool set from Siser)
- Siser Juliet Cutting machine
- Leonardo® Design Studio software
Isopropyl alcohol can be wiped over your drink bottle before transferring the EasyPSV to ensure the surface is clean of any dirt or debris that may prevent your vinyl from sticking.
This project can also be created using alternate equipment and software
Instructions
Step 1 - Choose your design. Siser's Leonardo® Design Studio comes pre-loaded with hundreds of royalty-free cut files or you can import your own designs.
Step 2 - Import your design into your cutter software, create your cut lines and set the size you would like your design to be when cut.
Step 3 - Place your vinyl on your cutting mat and cut using your machines recommended settings, you do not need to mirror your design. Use your weeding tools to remove any excess vinyl. Then, use the Siser EasyPSV application tape to transfer your EasyPSV from its backing sheet to your blank. Remove the application tape's paper liner and place the tape on top of your cut EasyPSV design. Burnish with your EasySqueegee and then carefully lift the application tape and EasyPSV away from its liner.
Step 4 - Place your transfer and application tape on your blank drink bottle. Burnish with a squeegee to fully adhere the design and then gently peel away the application tape, leaving just your EasyPSV design on your bottle.
Caring for your drink bottles
- Wait 72 hours before you first wash your bottle
- EasyPSV Starling is dishwasher safe in the top rack only
- It is not recommended to put EasyPSV Glitter in the dishwasher, hand wash only
