![]() | ||
Your browser is not supported. | ||
Please browse our site using any of the following options:
| ||
STUDIO E SEW VINTAGE QUILT
![Studio E Sew Vintage Quilt Project Studio E Sew Vintage Quilt Project](/medias/studio-e-sew-vintage-quilt-project.jpeg?context=bWFzdGVyfHJvb3R8MTYwMjE4fGltYWdlL2pwZWd8cm9vdC9oMGQvaDI5LzEwODA0NTQ0NTAzODM4L3N0dWRpby1lLXNldy12aW50YWdlLXF1aWx0LXByb2plY3QuanBlZ3wwY2I4NDBmYmUzZGY2NzFiYTQ4ZDg5NmZkOGZkNzcyZDBiYzI3NzFmNjUyMDY1ODY1NjcyMTRlZWUzZjIxMmM0)
Level: Intermediate
WHAT YOU’LL NEED
- Batting 56” x 58” (Recommended: Air Lite® Colour Me 100% Cotton)
- Piecing and sewing thread
- Quilting and sewing supplies
Fabric Requirements
- Fabric A (1817-55 Sew Vintage Blocks – Lilac – ⅔ yard
- Fabric B (1818-90 Sew Vintage Notions – Gray) – ⅛ yard
- Fabric C (1819-55 Sew Vintage Buttons – Purple) – ⅜ yard
- Fabric D (1820-90 Sew Vintage Dresses – Gelati) – 1 ⅛ yards
- Fabric E (1821-33 Sew Vintage Pattern Pieces – Natural) – ¼ yard
- Fabric F (Blue Bell-17 Peppered Cottons – Blue Bell)* – ⅜ yard
- Fabric G (Charcoal-14 Peppered Cottons – Charcoal)** – 1 ⅛ yards
- Backing (1818-90 Sew Vintage Notions – Gray) – 3 ¼ yards
* Includes Binding
** Peppered Cottons Collection
MEASUREMENTS |
| |
Finished Size | inch | Step 4 – x 50 |
Note – All strips are cut across the width of fabric (WOF) from selvage to selvage edge unless otherwise noted.
ABBREVIATIONS
WOF = Width of Fabric, LOF = Length of Fabric.
INSTRUCTIONS
Please download the PDF above to view all Fig. templates referenced in this project.
CUTTING
Fabric A – fussy cut –
- (4) 7 ¾” x 10” WOF strips each centered on a block.
- (4) 10” x 7 ¾” WOF strips each centered on a block.
Fabric B – cut –
- (1) 2 ½” x WOF strip, sub-cut (10) 2 ½” x 3 ¼” strips.
Fabric C – cut –
- (1) 2 ½” x WOF strip, sub-cut (10) 2 ½” x 3 ¼” strips.
- (1) 6 ½” x WOF strip, sub-cut (4) 6 ½” squares.
Fabric D – cut –
- (2) 6 ½” x 38 ½” LOF strips.
- (2) 6 ½” x 36 ½” WOF strips, piecing as needed.
- (1) 11 ½” x 9 ½” WOF strip.
Fabric E cut –
- (2) 2 ½” x WOF strips, sub-cut (20) 2 ½” x 3 ¼” strips.
Fabric F – cut–
- (2) 2” x 35 ½” WOF strips.
- (2) 2” x 36 ½” WOF strips.
- (2) 1 ½” x WOF strips, sub-cut (4) 1 ½” x 11 ½” strips.
Fabric G – cut –
- (2) 2” x WOF strips, sub-cut (8) 2” x 10” strips.
- (3) 2” x WOF strips, sub-cut (8) 2” x 10 ¾” strips.
- (2) 2” x WOF strips, sub-cut (8) 2” x 7 ¾” strips.
- (3) 2” x WOF strips, sub-cut (8) 2” x 13” strips.
- (5) 2 ½” x WOF strips for the binding
Backing – cut –
- (2) 56” x WOF strips. Sew the strips together and trim to 56” x 58” to make the back.
SEWING
Sew using a ¼” seam allowance with right sides together (RST) unless otherwise indicated. Always press towards the darker fabric while assembling, unless otherwise noted by the arrows.
BLOCK ASSEMBLY
Step 1 – Sew (1) 2” x 10” Fabric G strip to each side of (1) 7 ¾” x 10” Fabric A block.
Sew (1) 2” x 10 ¾” Fabric G strip to the top and to the bottom of the Fabric A block.
Trim the unit to measure 9 ½” x 11 ½” to make (1) Unit 1 rectangle (Fig. 1). Repeat to make (4) Unit 1 rectangles total.
Fig. 1 – Unit 1 – Make 4 – Trim unit to measure 9 ½” x 11½” AFTER adding borders.
Step 2 – Sew (1) 2” x 7 ¾” Fabric G strip to each side of (1) 10” x 7 ¾” Fabric A block. Sew (1) 2” x 13” Fabric G strip to the top and to the bottom of the Fabric A block. Trim the unit to measure 11 ½” x 9 ½” to make (1) Unit 2 rectangle (Fig. 2). Repeat to make (4) Unit 2 rectangles total.
Fig. 2 – Unit 1 – Make 4 – Trim unit to measure 11 ½” x 9½” AFTER adding borders.
Step 3 – Sew (1) 1 ½” x 11 ½” Fabric F strip to each side of (1) 9 ½” x 11 ½” Fabric D strip. Sew (1) 1 ½” x 11 ½” Fabric F strip to the top and to the bottom of the Fabric D strip to make (1) Unit 3 rectangle (Fig. 3).
Step 4 – Sew together (1) 2 ½” x 3 ¼” Fabric C strip, (1) 2 ½” x 3 ¼” Fabric E strip, (1) 2 ½” x 3 ¼” Fabric B strip and (1) 2 ½” x 3 ¼” Fabric E strip, end to end and in that order, to make (1) Unit 4 strip. Repeat to make (10) Unit 4 strips total.
Step 5 – Sew (1) Unit 4 strip to the top of (1) Unit 2 rectangle. Sew (1) Unit 4 strip to each side of the Unit 2 rectangle. Sew (1) Unit 1 rectangle to each end of the newly sewn strip to make Row One (Fig. 5).
Step 6 – Sew (1) Unit 4 strip to the top and to the bottom of (1) Unit 2 rectangle. Repeat with a second Unit 2 rectangle. Sew (1) newly sewn block to each side of (1) Unit 3 rectangle to make Row Two (Fig. 6).
Step 7 – Sew (1) Unit 4 strip to the bottom of (1) Unit 2 rectangle. Sew (1) Unit 4 strip to each side of the newly sewn block. Sew (1) Unit 1 rectangle to each end of the newly sewn strip to make Row Three (Fig. 7).
QUILT TOP ASSEMBLY
(Follow the Quilt Layout while assembling the quilt top.)
Step 8 – Sew together the (3) Rows, in numerical order, to make the Center Block.
Step 9 – Sew (1) 2” x 35 ½” Fabric F strip to each side of the Center Block. Sew (1) 2” x 36 ½” Fabric F strip to the top and to the bottom of the Center Block.
Step 10 – Sew (1) 6 ½” x 38 ½” Fabric D strip to each side of the Center Block. Sew (1) 6 ½” Fabric C square to each end of (1) 6 ½” x 36 ½” Fabric D strip. Repeat to make a second strip. Sew the newly sewn strips to the top and to the bottom of the Center
Block to make the quilt top.
LAYERING, QUILTING & FINISHING
Step 11 – Press the quilt top and 56” x 58” backing well. Layer backing (wrong side up), batting, pressed quilt top (right side up) and baste. Quilt as desired and trim excess batting and backing when quilting is complete.
BINDING
Step 12 – Cut the ends of the (5) Fabric G Binding strips at a 45-degree angle and sew end to end to make (1) continuous piece of binding. Fold in half lengthwise and press wrong sides together.
Step 13 – Sew the binding to the front of the quilt, raw edges together. Turn the folded edge to the back, and hand stitch in place.